Thermodiffusion‐Assisted Pyroelectrics—Enabling Rapid and Stable Heat and Radiation Sensing

Sensors for monitoring temperature, heat flux, and thermal radiation are essential for applications such as electronic skin. While pyroelectric and thermoelectric effects are suitable candidates as functional elements in such devices, both concepts show individual drawbacks in terms of zero equilibrium signals for pyroelectric materials and small or slow response of thermoelectric materials. Here, these drawbacks are overcome by introducing the concept of thermodiffusion‐assisted pyroelectrics, which combines and enhances the performance of pyroelectric and ionic thermoelectric materials. The presented integrated concept provides both rapid initial response upon heating and stable synergistically enhanced signals upon prolonged exposure to heat stimuli. Likewise, incorporation of plasmonic metasurfaces enables the concept to provide both rapid and stable signals for radiation‐induced heating. The performance of the concept and its working mechanism can be explained by ion–electron interactions at the interface between the pyroelectric and ionic thermoelectric materials.     

Effect of Operating Parameters on Gas‐Solid Hydrodynamics and Heat Transfer in a Spouted Bed

Through a combined computational fluid dynamics and discrete element method approach, the effect of the operating parameters on the hydrodynamics and heat‐transfer properties of gas‐solid two‐phase flows in a spouted bed are extensively investigated. Considering the high velocity in the fountain region, gas turbulence is resolved by employing the large‐eddy simulation. The rolling friction model is adopted for more precise predictions of solid behavior near the wall. Subsequently, the gas‐solid flow patterns, gas‐solid velocities, and temperature evolution are investigated. Moreover, different operating conditions and geometry configurations are evaluated with respect to heat‐transfer performance. The results provide a fundamental understanding of heat‐transfer mechanisms in spouted beds.     

氨基磺酸盐型水性醋酸纤维乳液的制备与性能

采用乙二胺基乙磺酸钠(AAS)作为亲水剂,在二月桂酸二丁基锡(DBTDL)的催化下,通过异佛尔酮二异氰酸酯(IPDI)将亲水基引入二醋酸纤维(CA)分子中,制得了一种氨基磺酸盐型水性醋酸纤维乳液(SWCA)。利用FTIR、DLS、黏度计、TEM、SEM、接触角测量仪、XRD、TGA,对SWCA结构及涂膜性能进行表征。考察了IPDI与AAS物质的量比对SWCA乳液粒径、黏度、涂膜表观形貌及耐水性的影响。结果表明:当n(IPDI)∶n(AAS)=1.1∶1时,乳液最稳定,微观形态呈水包油型(O/W)核壳结构,乳液粒径和分散系数(PDI)最小,分别为128nm和0.112,此时乳液表观黏度最大,为73.5m Pa·s,所成涂膜致密平整,接触角可达110.2°±2°,表现出明显的疏水性;此外,与二醋酸纤维相比,SWCA涂膜结晶性减弱,呈微晶态或次晶态结构,且具有较好的耐热性。     

Neural network modelling on temperature coefficient of surface tension and its usage in melting point prediction of nanosized metal particles

Temperature coefficient of surface tension is a very important parameter to calculate phase diagrams of nanoparticle metal systems. In this paper, neural network calculation was for the first time used to evaluate the temperature coefficient. It shows that the constructed neural network can predict the temperature coefficient values for 37 metals, with the deviation from the averaged experimental measurements smaller than 25%. Furthermore, the neural network predictions were compared with the calculated values by using an empirical equation and it shows a better performance.     

Advanced Friction–Wear Behavior of Organic Brake Pads Using a Newly Developed System

The objective of this study was to investigate the influence of an advanced performance system on the tribological behavior of brake pad material using a specially designed brake pad tester system following standard SAE J-661. The tribological behavior and friction and wear characteristics of the organic brake pad samples were evaluated. During braking tests, the samples, in contact with a cast iron disk, were studied at different disc speeds, temperatures, and braking cycles under a constant pressure. In order to understand the friction and wear behavior, the unworn surfaces, worn surfaces, and wear debris were characterized by means of scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). Furthermore, the surface characteristics and differences in the wear modes of the brake pad samples were examined. Wear debris was permitted to deform the brake pad surfaces, leading to friction layers and enabling the estimation of the friction behavior of the brake pads. The results showed that the best friction–wear behavior was obtained with lower braking cycles at low speeds and temperature. Thus, the newly developed brake pad tester system proved very effective in evaluating the performance of the brake pad samples.     

Friction Behavior of Human Skin Rubbing against Different Textured Polymeric Materials Obtained by a 3D Printing Microfabrication Technique

Understanding friction behavior of human skin is indispensable in order to optimize surfaces and materials in contact with the skin. The coefficient of friction (COF) for different materials contacting against the skin is mainly influenced by the nature of the materials, mechanical contact parameters, and physiological skin conditions. The aim of the present research work was to study the grip effect of two different polymeric materials by producing different textured patterns using a 3D printing microfabrication technique and a replication technique. It was found that under the same contact conditions, a difference in the friction amplitude exists between the two different polymeric materials and that positive texturing, which consists of high relief or protrusions, showed higher COFs than negative texturing, consisting of low relief, holes, or dimples, which showed a decrease in friction as the textured pattern area density increased.     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Heating frequency optimization for artificial field-aligned scattering

In this study, we present a simulation study of artificial field-aligned irregularities (AFAI) to calculate the scattering coefficient considering a Gaussian autocorrelation function for the wave number spectrum of the density fluctuation. By analyzing variations in the scattering coefficient under different ionospheric backgrounds, the optimal range of the heating frequency was found, which is about 0.9–1 times the critical frequency of the F2 layer. This is especially noticeable as when the heating frequency varies from 0.5 times to 0.9 times of the critical frequency, the scattering coefficient increases by 6.8–16.2 dB. These results should be useful for optimizing the heating frequency in the future artificial field-aligned scattering (AFAS) transmission applications at middle and low latitudes.     

Nonreciprocal properties of 1D magnetized plasma photonic crystals with the Fibonacci sequence

In this paper, the nonreciprocal properties of a novel kind of 1D magnetized plasma photonic crystals(MPPCs) with the Fibonacci sequence are investigated. The isolation of the proposed 1D MPPCs is also used to analyze the nonreciprocal properties. Compared to the conventional 1D MPPCs with periodic structure, the nonreciprocal performance can be significantly improved.The effects of several parameters of the proposed 1D MPPCs on the nonreciprocal properties are studied by the transfer matrix method, which includes the incident angle, order of the Fibonacci sequence, plasma frequency, plasma cyclotron frequency and plasma filling factor. The obtained results show that the nonreciprocal propagation properties can be improved by increasing the values of the plasma cyclotron frequency and incident angle, but they will worsen by blindly increasing the order of the Fibonacci sequence, plasma frequency and filling factor of plasma.The peaks of transmittance also are obviously reduced. In addition, the value of isolation will increase with increasing the incident angle, order of Fibonacci sequence, plasma frequency and plasma filling factor. However, when the plasma cyclotron frequency is increased, the value of isolation will be increased at lower frequencies, but is almost unchanged at higher frequencies.